Volume Values Research Articles

Quantitative Analysis and 3D Visualization of Crack Behavior in 3D-Printed Rock-Like Specimens with Single Flaw Using In-Situ Micro-CT Imaging

Abstract3D printing technology allows for precise control of preparing complex geometries and internal defects in printed rock analogs, while in-situ Micro-CT imaging enables real-time observation of crack behavior. The combination of these technologies offers a new research approach for studying rock crack behavior. In this study, 3D-printed rock-like specimens containing a pre-existing flaw were prepared using a gypsum powder-based 3D printer. An advanced in-situ Micro-CT system equipped with a loading device was used to quantitatively and visually investigate the crack behavior in 3D-printed specimens under uniaxial compression testing. 2D CT images obtained from in-situ compression testing at different deformations could be used to reconstruct a 3D model and visually identify the crack patterns of the extracted cracks in 3D-printed specimens. The initiation angle of cracks, volume of the pre-existing flaw, volume of newly formed cracks, and damage value with respect to strains were analyzed to quantitatively investigate crack behavior. The results indicated that within the 3D-printed specimens, tensile cracks were first initiated near the internal flaw, followed by the occurrence of shear cracks or tensile-shear mixed cracks at the flaw tips. Additionally, there was a negative linear correlation between the initiation angle of newly formed cracks and the initial flaw angle. For flaw angles in the range of 0° ≤ α ≤ 45°, a higher number of newly formed cracks were observed in the 3D-printed specimens, and the rates of increase in crack volume and damage values with strain were faster. However, for flaw angles in the range of 45° < α ≤ 90°, the results showed the opposite trend. Furthermore, through comparison with the crack behavior of natural rocks containing a single flaw, it was found that the failure modes and crack behavior of the 3D-printed specimens exhibit certain similarities with natural rocks.

Radiomics Analysis of Pericoronary Adipose Tissue From Baseline Coronary Computed Tomography Angiography Enables Prediction of Coronary Plaque Progression.

The relationship between plaque progression and pericoronary adipose tissue (PCAT) radiomics has not been comprehensively evaluated. We aim to predict plaque progression with PCAT radiomics features and evaluate their incremental value over quantitative plaque characteristics. Between January 2009 and December 2020, 500 patients with suspected or known coronary artery disease who underwent serial coronary computed tomography angiography (CCTA) ≥2 years apart were retrospectively analyzed and randomly stratified into a training and testing data set with a ratio of 7:3. Plaque progression was defined with annual change in plaque burden exceeding the median value in the entire cohort. Quantitative plaque characteristics and PCAT radiomics features were extracted from baseline CCTA. Then we built 3 models including quantitative plaque characteristics (model 1), PCAT radiomics features (model 2), and the combined model (model 3) to compare the prediction performance evaluated by area under the curve. The quantitative plaque characteristics of the training set showed the values of noncalcified plaque volume (NCPV), fibrous plaque volume, lesion length, and PCAT attenuation were larger in the plaque progression group than in the nonprogression group ( P < 0.05 for all). In multivariable logistic analysis, NCPV and PCAT attenuation were independent predictors of coronary plaque progression. PCAT radiomics exhibited significantly superior prediction over quantitative plaque characteristics both in the training (area under the curve: 0.814 vs 0.615, P < 0.001) and testing (0.736 vs 0.594, P = 0.007) data sets. NCPV and PCAT attenuation were independent predictors of coronary plaque progression. PCAT radiomics derived from baseline CCTA achieved significantly better prediction than quantitative plaque characteristics.

El Efecto de bioaditivos en indicadores bioproductivos de cobayas (Cavia porcellus) nulíparas y sus crías

Objective. To evaluate the effect of biopreparations obtained from agroindustrial by-products fermented with lactic acid bacteria and yeasts on the bioproductive behavior of primiparous guinea pigs and their offspring. Materials and methods. A total of 40 nulliparous guinea pigs were used, with 125 d of age, 1450 g of live weight, distributed in four groups of 10 animals each. T1, Control (basal diet without additive); T2, substrate fermented with Lactobacillus acidophilus. T3, substrate fermented with Kluyveromyces fragilis and T4, substrate fermented with L. acidophillus and K. fragilis. A completely randomized design was used where weight gain during pregnancy, age at first delivery, percentage of fertility, conception index, health, and values ​​of hemoglobin, hematocrit and mean corpuscular volume were evaluated. Results. Weight gain during pregnancy was greater (P &lt;0.05) in T4; the age at first delivery was reduced (P &lt;0.05) in Treatment 4; the fertility percentage and the conception index were better (P &lt;0.05) in the animals that consumed the T4 biopreparation, the occurrence of diarrhea was lower (P &lt;0.05) in the T4 group. Hematological values ​​ware improved in all groups that consumed biopreparations. Conclusions. The use of agroindustrial substrates fermented with L. acidophilus and K. fragilis improved the productive and reproductive indicators in primiparous guinea pigs. In addition, it intervenes in the improvement of health and hematological values.

Incorporation of neodymium, holmium, erbium, and samarium (oxides) in zinc-borotellurite glass: Physical and optical comparative analysis

Investigating the effect of different types of rare-earth oxides on zinc borotellurite glass is important to determine the potential application in optical devices. The addition of rare-earth oxides in zinc borotellurite glass is well-known to enhance the optical properties due to the effects of 4f-4f transitions. In this work, we aim to compare the effect of different rare-earth oxides on zinc borotellurite glass denoted as ZBTNd, ZBTHo, ZBTEr and ZBTSm. The glass samples were successfully fabricated via the melt-quenched technique. The physical investigation of the glasses has been done by measuring the density and molar volume. It was found that ZBTNd glass has the lowest density than the other glasses due to the small atomic radius in neodymium oxide. High-density value for ZBTHo glass shows potential to be used as radiation shielding properties. The high value of molar volume for ZBTNd glass is advantageous for fiber optics as ZBTNd glass has good performance in elasticity. It was found that ZBTEr has a lower refractive index than the other glasses due to low dispersion characteristics. However, ZBTEr glass has good performance to be used in optical communication applications. It was found that the optical absorption shifts to a longer wavelength beginning from ZBTEr &gt; ZBTHo &gt; ZBTNd &gt; ZBTSm. The optical band gap energy for ZBTEr glass is higher than the other glasses due to the Coulomb repulsion energy for erbium which is greater than neodymium and samarium and slightly higher than holmium. The pattern of electronic polarizability for all glasses was found as follows ZBTSm&gt;ZBTNd&gt;ZBTEr&gt;ZBTHo. The optical basicity for ZBTEr was found highest which indicates a higher acidity, meanwhile, the ZBTNd glass has the lowest value which corresponds to a higher basicity.

Abstract PO3-02-11: Impact of Tumor Volume on Oncologic Outcomes in Patients with T1 Breast Cancer: A Retrospective Analysis

Abstract Backgrounds: Measuring the extent of tumor cell accretion in the primary organ typically involves assessing the longest diameter, an important component of the widely employed TNM staging system. The largest tumor diameter is considered indicative of the risk of cancer metastasis and the likelihood of distant recurrences. However, relying solely on the unidimensional diameter to determine the degree of cancer cell accretion can be inadequate since each tumor has a unique three-dimensional shape, thus leading to different tumor volumes. Purpose: The aim of this study was to investigate the impact of tumor volume on oncologic outcomes in patients with T1-2 breast cancer. Method: We retrospectively reviewed the medical records of 1,018 patients diagnosed with invasive breast cancer who underwent breast-conserving surgery at Seoul National University Bundang Hospital from 2010 to 2015. Patients with multiple tumors, positive margins leading to mastectomy, or those who received neoadjuvant chemotherapy were excluded. Tumor volume was defined as the product of the length of the three axes to simplify the calculation. Recurrence-free survival (RFS) was estimated by the Kaplan-Meier analysis. Result: The median value for tumor volume was 7.502 cm³. Out of 1,018 patients, 124 patients exhibited tumor volumes greater than the median value. Higher tumor volume was associated with pathologic T stage (P &amp;lt; 0.001), pathologic N stage (P = 0.004), histologic grade (P &amp;lt; 0.001), and luminal B subtype (P = 0.008). In multivariable logistic regression analyses for recurrence, higher tumor volume (OR 3.532, 95% CI 1.708-7.303, P = 0.001), CEA elevation (OR 6.129, 95% CI 1.497-25.092, P = 0.012), pN stage (OR 2.038, 95% CI 1.005-4.132, P = 0.048), and luminal B subtype (OR 2.407, 95% CI 1.060-5.470, P = 0.036) were shown to be predictive factors for recurrence, while completion of radiation therapy (OR 0.142, 95% CI 0.050-0.402, P &amp;lt; 0.001) and completion of hormone therapy (OR 0.200, 95% CI 0.047-0.849, P = 0.029) were identified as protective factors. The 5-year RFS was significantly lower in patients with higher tumor volume compared to those with lower volume (97.4% vs. 91.9%; p &amp;lt; 0.001). In multivariable Cox regression analysis, tumor volume (HR 3.056, 95% CI 1.572-5.940, P = 0.001), CEA elevation (HR 4.934, 95% CI 1.437-16.935, P = 0.011), luminal B subtype (HR 2.336, 95% CI 1.076-5.073, P = 0.032), completion of RT (HR 0.131, 95% CI 0.053-0.325, P &amp;lt; 0.001), and completion of HTx (HR 0.199, 95% CI 0.060-0.655, P = 0.008) were identified as independent prognostic factors for RFS. Conclusion: In the current study, we showed higher tumor volume results in poorer oncologic outcomes in patients with T1-2 breast cancer. Therefore, the T stage based on tumor volume, which includes all three-dimensional measurements, can better predict the prognosis in breast cancer patients than the traditional T stage that is solely dependent on the unidimensional longest tumor diameter. Citation Format: Hyoung Won Koh, Eun-Kyu Kim, Hee-Chul Shin. Impact of Tumor Volume on Oncologic Outcomes in Patients with T1 Breast Cancer: A Retrospective Analysis [abstract]. In: Proceedings of the 2023 San Antonio Breast Cancer Symposium; 2023 Dec 5-9; San Antonio, TX. Philadelphia (PA): AACR; Cancer Res 2024;84(9 Suppl):Abstract nr PO3-02-11.

Abstract PO2-22-06: MRI response Assessment of Single Fraction Pre-operative Stereotactic Radiotherapy: Preliminary results

Abstract Background: Pre-operative stereotactic breast irradiation (SPBI) improves targeting precision and has the potential to decrease treatment-related toxicity while downstaging or eliminating cancer. Accurate pCR prediction may allow omission of surgery. We are reporting initial interim results of the performance of multiparametric breast MRI in identifying pathologic response rate after single-fraction pre-operative SPBI in early stage estrogen receptor-positive (ER+), HER-2 negative breast cancer. Methods: In an ongoing single center prospective single-arm trial 22 patients with ER+/HER2-negative, cN0, unifocal, invasive breast cancer ≤3 cm underwent single-dose ablative SPBI, followed by definitive surgery per standard of care. Residual disease vs complete imaging response to SPBI was assessed on baseline and post-SPBI/pre-operative breast MRI. Pathologic response was categorized using MDACC Residual Cancer Burden (RCB) Categories. Wilcoxon rank sum test was used to assess the correlation of pathologic complete response (pCR) or RCB status on final path with MRI lesion size, volume, diffusion weighted imaging apparent diffusion coefficient (ADC) value, and when available, presence of residual enhancement on pre-operative MRI. MRI volume and ADC values were obtained using a dedicated CAD software. Area under the receiver operating Curve(AUC) was constructed to assess the diagnostic performance of pre-operative MRI on predicting pathologic response. Results Mean patient age was 64.9 (SD±7.3) years, tumor diameter 1.2(± 0.6) cm, pre-SPBI volume 6.4 ± 9.1 cm3, post SPBI volume 1.8 ± 5.6 cm3, ADC 0.91 ×10-3 mm2/s. At surgical pathology, 6(27.2%) achieved pCR/RCB-0, 9(41%) RCB-I, 7(31.8%) RCB-II. Mean baseline MRI size (1.2 ± 0.7 vs 1.3 ± 0.6, p=0.88), enhancement volumes (6.0±6.2 vs 7.9±9.9 cm3, p=0.59), DWI ADC values (1.1 ± 0.3 vs 0.9 ± 0.2 mm2/s, p-0.48) were not significantly different between tumors that showed pCR vs RCB I-II at surgical pathology. Time elapsed from SBRT to surgery were significantly longer in patients with pCR (264.3 ± 74.2 vs 183.7 ± 68.3 days, p=0.04) On pre-op MRI, mean enhancement volume was smaller in cancers that had pCR, however it did not reach significance (0.1 ± 0.1 vs 2.1 ± 6.0 cm3, p=0.2). Of 18 patients with available pre-operative MRI, residual enhancement was present in 7, of these 6/7(87%) had RCB I-II, and 1/7(13%) RCB-0 at surgical pathology. Conversely, in 11 patients with no residual enhancement on MRI, pathology showed pCR/RCB-0 in 5(45.5%), while 6(54.5%) had RCB I or II. Presence of residual enhancement on pre-operative MRI had an AUC of 0.68 (95%CI 0.43; 0.93, p=0.2) in predicting residual cancer after SPBI. Conclusion: Detecting residual enhancement on pre-operative MRI is a strong indicator of residual disease after SPBI, while lack of enhancement is not a reliable predictor of pCR. Our preliminary results do not indicate an association between baseline MRI enhancement volume, DWI ADC and pathologic response. Citation Format: Baṣak Dogan, Sunati Sahoo, Marilyn Leitch, Prasanna Alluri, Robert Timmerman, Deborah Farr, Asal Rahimi. MRI response Assessment of Single Fraction Pre-operative Stereotactic Radiotherapy: Preliminary results [abstract]. In: Proceedings of the 2023 San Antonio Breast Cancer Symposium; 2023 Dec 5-9; San Antonio, TX. Philadelphia (PA): AACR; Cancer Res 2024;84(9 Suppl):Abstract nr PO2-22-06.

Right ventricular volume and function by three-dimensional echocardiography: results of the echocardiographic measurements in normal Chinese adults (EMINCA) II.

Three-dimensional (3D) echocardiography is an emerging technique for assessing right ventricular (RV) volume and function, but 3D-RV normal values from a large Chinese population are still lacking. The aim of the present study was to establish normal values of 3D-RV volume and function in healthy Chinese volunteers. A total of 1117 Han Chinese volunteers from 28 laboratories in 20 provinces of China were enrolled, and 3D-RV images of 747 volunteers with optimal image quality were ultimately analyzed by a core laboratory. Both vendor-dependent and vendor-independent software platforms were used to analyze the 3D-RV images. We found that men had larger RV volumes than women did in the whole population, even after indexing to body surface area, and older individuals had smaller RV volumes. The normal RV volume was significantly smaller than that recommended by the American Society of Echocardiography/European Association of Cardiovascular Imaging guidelines in both sexes. There were significant differences in 3D-RV measurements between the two vendor ultrasound systems and the different software platforms. The echocardiographic measurements in normal Chinese adults II study revealed normal 3D-RV volume and function in a large Chinese population, and there were significant differences between the sexes, ages, races, and vendor groups. Thus, normal 3D-RV values should be stratified by sex, age, race, and vendor.

Patient-specific closed-loop model of the Fontan circulation: calibration and validation

The Fontan circulation, designed for managing patients with a single functional ventricle, presents challenges in long-term outcomes. Computational methods offer potential solutions, yet their application in cardiology practice remains largely unexplored. Our aim was to assess a patient-specific, closed-loop, reduced-order blood flow model’s ability to simulate pulsatile blood flow in the Fontan circulation. Using one-dimensional models, we simulated the aorta, superior and inferior venae cavae, and right and left pulmonary arteries, while lumping heart chambers and remaining vessels into zero-dimensional models. The model was calibrated with patient-specific haemodynamic data from combined cardiac catheterisation and magnetic resonance exams, using a novel physics-based stepwise methodology involving simpler open-loop models. Testing on a 10-year-old, anesthetised patient, demonstrated the model’s capability to replicate pulsatile pressure and flow in the larger vessels and ventricular pressure. Average relative errors in mean pressure and flow were 2.9% and 3.6%, with average relative point-to-point errors (RPPE) in pressure and flow at 5.2% and 16.0%. Comparing simulation results to measurements, mean aortic pressure and flow values were 50.7 vs. 50.4 mmHg and 41.6 vs 41.9 ml/s, respectively, while ventricular pressure values were 28.7 vs. 27.4 mmHg. The model accurately described time-varying ventricular volume with a RPPE of 2.9%, with mean, minimum, and maximum ventricular volume values for simulation results vs. measurements at 59.2 vs. 58.2 ml, 38.0 vs 37.6 ml, and 76.0 vs. 74.4 ml, respectively. It provided physiologically realistic predictions of haemodynamic changes from pulmonary vasodilation and atrial fenestration opening. The new model and calibration methodology are freely available, offering a platform to virtually investigate the Fontan circulation’s response to clinical interventions and explore potential mechanisms of Fontan failure. Future efforts will concentrate on broadening the model’s applicability to a wider range of patient populations and clinical scenarios, as well as testing its effectiveness.

Additive manufactured parts surface treatment through impinged hot air jet technique the theoretical and experimental evaluation

Purpose Material extrusion-based additive manufacturing is a prominent manufacturing technique to fabricate complex geometrical three-dimensional (3D) parts. Despite the indisputable advantages of material extrusion-based technique, the poor surface and subsurface integrity hinder the industrial application of this technology. The purpose of this study is introducing the hot air jet treatment (HAJ) technique for surface treatment of additive manufactured parts. Design/methodology/approach In the presented research, novel theoretical formulation and finite element models are developed to study and model the polishing mechanism of printed parts surface through the HAJ technique. The model correlates reflow material volume, layer width and layer height. The reflow material volume is a function of treatment temperature, treatment velocity and HAJ velocity. The values of reflow material volume are obtained through the finite element modeling model due to the complexity of the interactions between thermal and mechanical phenomena. The theoretical model presumptions are validated through experiments, and the results show that the treatment parameters have a significant impact on the surface characteristics, hardness and dimensional variations of the treated surface. Findings The results demonstrate that the average value of error between the calculated theoretical results and experimental results is 14.3%. Meanwhile, the 3D plots of Ra and Rq revealed that the maximum values of Ra and Rq reduction percentages at 255°C, 270°C, 285°C and 300°C treatment temperatures are (35.9%, 33.9%), (77.6%,76.4%), (94%, 93.8%) and (85.1%, 84%), respectively. The scanning electron microscope results illustrate three different treatment zones and the treatment-induced and manufacturing-induced entrapped air relief phenomenon. The measured results of hardness variation percentages and dimensional deviation percentages at different regimes are (8.33%, 0.19%), (10.55%, 0.31%) and (−0.27%, 0.34%), respectively. Originality/value While some studies have investigated the effect of the HAJ process on the structural integrity of manufactured items, there is a dearth of research on the underlying treatment mechanism, the integrity of the treated surface and the subsurface characteristics of the treated surface.

Efficacy of Phlogenzyme® in men following transurethral laser enucleation of prostate hyperplasia: results of a randomized trial

Introduction. The most advanced and effective method of surgical treatment for benign prostatic hyperplasia (BPH) is transurethral laser enucleation of the prostate (tLEP). Recently, there has been a growing interest in exploring new approaches to reduce the risk of complications following tLEP.Objective. To evaluate the efficacy of using Phlogenzym® as part of a comprehensive treatment plan for patients following tLEP to reduce dysuria (urinary discomfort), leukocyturia (white blood cells in urine), and prevent infectious and fibrosis-related complications.Materials &amp; methods. An open-label, randomized trial enrolled 105 patients undergoing tLEP. The patients were randomly assigned to two groups: the study group (n=50) received standard postoperative care in combination with Phlogenzym® for 30 days, while the control group (n=55) received standard care (α1-adrenergic blocker for 28 days) only. uring the follow-up period, which lasted for 1, 3, and 6 months postoperatively, complaints were evaluated using the IPSS-QoL, and IIEF-5 questionnaires, as well as indicators of urinalysis and urine culture, prostate volume measurements, residual urine volume, and uroflowmetry data.Results. Among all patients, the median preoperative values for prostate volume, IPSS, QoL score, and median peak urine flow rate were 90 cc, 18 points, 5 points, and 7.9 mL/s, respectively, with no significant differences between the groups. One month after surgery, in the study group, there was a more significant decrease in prostate volume (57% vs. 41%), although this difference was not statistically significant (p &gt; 0.05). At the 6-month follow-up, bacteriuria was less common in the study group (42% vs. 67%), and there was a consistent trend toward a reduction in the incidence of fibrous complications, although these differences were not statistically significant either (p &gt; 0.05). No adverse events occurred during the follow-up period.Conclusion. Our experience suggests that the use of Phlogenzym® is safe during the postoperative period following tLEP surgery. The use of this drug leads to a reduction in prostate volume postoperatively and significantly reduces the bacteriuria by the six-month follow-up. Additionally, there is a persistent positive trend towards reducing the overall incidence of fibrotic complications in the surgical site. The results achieved and the absence of significant side effects characterize Phlogenzym® as having a favorable clinical profile.

Comparison of quality, dietary fiber and glycemic index of whole wheat breads using various modern and old wheats and investigate the effect of xylanase

AbstractSix bread wheat varieties (modern wheats) widely grown in Turkey and nine different bread wheat varieties registered prior to 1970 (old wheats) were used in the present study. This study aimed to determine and compare the quality characteristics, dietary fiber contents and in vitro glycemic index of whole wheat breads produced using modern and old bread wheat varieties. The effect of xylanase on the quality, staling and dietary fiber content of whole wheat breads was also investigated. Mean sedimentation and modified sedimentation values, Farinograph development time, stability, quality number of whole wheat flours produced by modern wheats were higher than those of the old varieties. Whole wheat breads of modern varieties had higher mean volume and lower firmness values as compared to old varieties. Whole wheat breads of old wheat varieties had higher mean soluble dietary fiber content as compared to that of modern wheat varieties. Xylanase addition generally had an increasing effect on bread volume and soluble dietary fiber contents and a softening effect on firmness values. There were no significant differences between the mean (in vitro) glycemic index values of whole wheat breads produced from modern and old varieties. The results in the present study indicated that modern bread wheat varieties had better whole wheat bread making quality as compared with old bread wheat varieties. In addition, xylanase usage in whole wheat bread formula had an improving effect on whole wheat bread quality.

Breeder Age and Hatching Egg Storage Duration: Effects on Post-Hatch Performance of FUNAAB- α Broiler Chickens

Abstract This trial was designed to evaluate the influence of hatching egg storage length and broiler breeder hens’ age on posthatch growth performance and physiological responses of FUNAAB-α chickens. Five hundred fertile eggs from each of 60 and 32 weeks old FUNAAB-α breeder hens were collected and assigned to 5 storage durations (0, 3, 7, 11 and 15 days). The hatching eggs were incubated using the conventional protocol. Data were collected on the growth performance and physiological responses. A 2x5 factorial design was used for the experiment. The results revealed that there was a decline in the final body weight in chickens from eggs of 15 and 11 days storage compared to the chickens from 7, 3 and 0 egg storage days. Chickens of 32 weeks old breeder hens had higher (p&amp;lt;0.05) mean corpuscular volume, white blood cell, heterophil and pack cell volume values compared to 60 weeks old breeder hens. Hatchlings from 60 weeks old breeders had a higher liver percentage (3.0% YFBW) than those from 32 weeks old breeders (2.8% YFBW). It was concluded that an extended storage duration of 15 days adversely affected the carcass traits and growth performance of chickens from egg storage above seven days.

Baseline parenchymal blood volume is a potential prognostic imaging biomarker in patients with malignant liver tumors treated with transarterial chemoembolization.

To assess the prognostic value of Parenchymal Blood Volume (PBV) in predicting survival, tumor response, and PBV response after transarterial chemoembolization (TACE). A total of 137 patients with malignant liver tumors who were treated with TACE between 07/2016 and 07/2018 were evaluated. Computed tomography illustrations were reworked at a dedicated workstation to create a PBV map which was overlapped with the associated magnetic resonance image to determine tumor diameter and PBV. Patients were divided into two groups according to their initial PBV value: PBV < 50 or ≥ 50ml/l. Retrospectively, for patients with at least 2 TACE and initial PBV < 50ml/l (n = 27), the tumor volume, regardless of the primary tumor type, decreased by 13.26%, and PBV showed a decrease of 23.11%. For 84 patients with PBV ≥ 50ml/l, the tumor volume decreased by 24.01%, and PBV showed a more substantial decrease of 44.69% (both p < 0.001). In the overall study population (n = 137), patients with an initial PBV ≥ 50ml/l (n = 101) survived for an average of 15.05months, while patients with an initial PBV < 50ml/l (n = 36) survived for 10.01months (p < 0.002). Subgroup analysis indicated that median survival in the HCC group was longer at PBV ≥ 50ml/l. For CRC and other primary tumors, the survival time for high and low initial PBV was almost identical. Our study reveals a noteworthy correlation between high initial PBV values and a significant reduction in both relative and absolute tumor volume. This association suggests a potential prognostic indicator, indicating that elevated PBV may signify a more favorable response to transarterial chemoembolization (TACE). Additionally, patients with high initial PBV values experienced an extended overall survival time. Notably, the subgroup analysis highlighted a prolonged survival time in the HCC group with elevated initial PBV values. These findings underscore the potential significance of assessing PBV as a predictive factor in the context of TACE, especially in specific tumor entities such as HCC. Further investigations are essential to validate and extrapolate these observations to optimize patient outcomes.

[Effects of Susac syndrome on the central vascular structure of the retina-An optical coherence tomography angiography study].

Susac syndrome (SS)describes an endotheliopathy of vessels in the central nervous system. Retinal involvement plays acentral role in the manifestation of the disease. This case-control study investigated the macular microvasculature in patients with chronic SS compared to controls using optical coherence tomography angiography (OCTA). 12eyes of 12patients with SS were compared with age-matched healthy control subjects with regard to their OCT angiographic parameters. The flow density (FD) of different macular layers, foveal avascular zone (FAZ) parameters and central retinal thickness and volume values were compared between the two groups. The FD of the choriocapillaris was reduced in Susac patients compared to healthy controls. The FD values of the superficial and deep capillary plexus of the inner retina, parameters of the FAZ as well as central retinal thickness and volume showed no significant differences between the two groups. Treated chronic SS does not appear to significantly affect the vascular and structural composition of the central inner retina; however, differences in the choriocapillaris indicate changes in deeper, highly vascularized capillary layers.

A Laboratory Machine Verifying the Operation of a Hydraulic Rope Equalizer with Tensometric Sensors.

In mining machines with friction discs, but also in multi-rope traction elevators, it is necessary to distribute the applied tensile load, generated by the weight of the cage and counterweight, evenly in all cross-sections of the load-bearing ropes. Hydraulic devices used for this purpose can operate on the principle of Pascal's law. This article presents a structural design, a 3D model and an implemented solution of a laboratory device capable of simulating a practical method of evenly distributing the total weight of the load into partial tensile forces of the same size acting on a selected number of load-bearing ropes. The laboratory equipment uses two pairs of three steel cables of finite length for the simulations. During the experimental measurements, tensile forces derived from the tractive force of the piston rods, pushed into the bodies of the hydraulic cylinders by the pressure of the hydraulic oil supplied through the pipeline under the pistons of the hydraulic cylinders, were detected. The resulting amount of hydraulic oil pressure in the hydraulic circuit influenced by different values of the hydraulic oil pressures in the hydraulic cylinders and by the pressure in the supply pipe was experimentally studied on the laboratory equipment. Simulations were also carried out in order to detect the hydraulic oil pressure in the hydraulic circuit caused by the change in the different magnitudes of the tensile forces in the ropes. From the experiments carried out, it follows that with the appropriate choice of hydraulic elements and the design of the hydraulic circuit, the weight of the load, acting as the total pulling force in the ropes, can be evenly distributed (with a deviation of up to 5%) to all cross-sections of the load-bearing ropes. If the exact values of the hydraulic oil volumes under the pistons of all hydraulic cylinders are not known, it is not possible to calculate the pressure values in the hydraulic circuit when the valves of the hydraulic pipes are gradually opened.

Toffoli-depth reduction method preserving in-place quantum circuits and its application to SHA3-256

When implementing a quantum circuit for a desired reversible function, an attempt is made to design an accurate quantum circuit. Then, the quantum circuit is optimized based on a specific cost function, such as design cost, width (the number of qubits), depth, etc. In particular, if an in-place subcircuit itself can be optimized while maintaining its in-place property, it will be a very useful way to increase efficiency without changing the initial architecture of the entire quantum circuit. Furthermore, since its (clean) work qubits can easily be utilized in subsequent subroutines of the quantum circuit, it has an additional important advantage in terms of width. In this paper, for the first time to the best of our knowledge, we present a global Toffoli-depth reduction methodology for an in-place version reversible circuit in the case that the given input circuit is optimized with Toffoli-count. We mainly introduce a process to optimize the χ\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\chi $$\\end{document} internal function block in SHA3-256 to explain our Toffoli-depth reduction approach preserving the in-place property, and hence, well-balanced five χ\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\chi $$\\end{document} quantum circuits are induced in terms of its width and T-depth. And then, we apply these five χ\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\chi $$\\end{document} circuits to design the entire SHA3-256 cryptosystem. One of the proposed SHA3-256 quantum circuits has a width of 1600 and a T-depth of 264, and this shows a result of 50% and 38.9% reduction compared to the previous circuit in terms of width and T-depth, respectively. Other versions of our SHA3-256 circuits just required 10–33 qubits per one T-depth compared to the previous results which require over 1800 qubits per T-depth, and so this means that our SHA3-256 circuits are well-balanced. Finally, we constructed Grover’s algorithm circuit using each version that realized SHA3-256. When output circuits for the presented method were used, quantum volume values of Grover’s algorithm circuits became 33 and 50%\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\%$$\\end{document} of the value when the input circuit was used.

Comparative Evaluation of Diagnostic Methods for Subclinical Benign Prostatic Hyperplasia in Intact Breeding Male Dogs.

Benign prostatic hyperplasia (BPH) is an androgen-related non-neoplastic enlargement of the prostate gland that commonly affects both reproductive capabilities and the general health of intact dogs. The subclinical form of BPH can be challenging to diagnose due to a lack of clinical signs, even if rectal palpation is performed. Left untreated, this condition poses risks to the dogs' health and breeding status. This study, involving 65 male dogs, aimed to investigate subclinical BPH through rectal palpation, ultrasonography, and analysis of canine prostatic-specific esterase (CPSE). Of the participants, 35 had subclinical BPH, and 30 served as a healthy control group. Dogs suspected of subclinical BPH, as determined by examination results from ultrasonography and CPSE analysis, underwent fine needle aspiration (FNA) guided by ultrasound to enhance diagnostic precision. Findings revealed distinct differences in rectal palpation and ultrasonography between subclinical BPH and healthy dogs. This study established diagnostic thresholds based on prostatic volume and CPSE values and proposed new thresholds for subclinical BPH. Additionally, results showed that prostate gland volume depended on the weight and the age of the dog. In conclusion, early detection of this condition is possible through various examinations, such as changes in ultrasound features, CPSE levels, and rectal palpation. All together, these methods can aid practitioners in early detection of BPH and assist with scheduling screening programs for dogs, ultimately promoting their overall health and reproductive well-being. In conclusion, we advocate for routine, non-invasive prostate screenings in breeding males, underlining the effectiveness of a combination of various multiple techniques for early subclinical BPH detection.

Modulatory Functions of Craterispermum schweinfurthi on the Hypothalamic-Pituitary-Gonadal Axis of Male Wistar Rats in Phenyl Hydrazine Induced Testicular Toxicity

Introduction: Modulation of the hypothalamic-pituitary-gonadal axis is mediated by different factors which are of research interest. Aim: To evaluate the modulatory functions of Craterispermum schweinfurthi leaf extract on the hypothalamic-pituitary-gonadal axis of male Wistar rats in phenyl hydrazine induced testicular toxicity. Methodology: 40 male Wistar rats weighing between 100-250g were randomly divided into 8 groups of 5 rats each. Testicular toxicity was induced through intraperitoneal administration of 40mg/kg of phenyl hydrazine at 9am on day 0 and two additional injections at 9am and 6pm on day 1 in all rat groups except groups 1 and 8 and were treated as follows for 14 days; Group 1: Rats in this group received distilled water only: Group 2: Untreated Phenyl hydrazine induced toxicity rats: Groups 3-5 received 250mg/kg, 500mg/kg and 750mg/kg body weight  of the extract: Group 6:  Rats in this group were administered 0.23ml/kg of Bioferon: Group7: Phenyl hydrazine + Phytosterol (2000mg/kg): Group 8: Phytosterol only (2000mg/kg). 24 hours after the last administration, the rats were anaesthetized using 3.5% chloroform soaked in cotton wool and blood samples collected through direct cardiac puncture for the estimation of serum concentration of reproductive hormones. Also, rat’s caudal epididymis was excised for the determination of sperm indices. Results: Administration of the hydromethanol leaf extract of Craterispermum schweinfurthi to rats Groups 3-5, significantly increased serum concentration of luteinizing, Follicle stimulating hormones and Testosterone compared to Group 2 (phenyl hydrazine induced toxicity) rats (p&lt;0.05): Suggesting a possible modulatory function of the extract. Significantly dose dependent higher values of sperm volume, viability, count, normal and active sperm were observed amongst groups 3-5 rats following the administration of graded doses of the extract compared to Group 2 (phenyl hydrazine induced toxicity) rats (p&lt;0.05). Suggesting a possible amelioration of the toxic effects of phenyl hydrazine. Conclusion: This study reports that administration of hydromethanol extract of Craterispermum schweinfurthi caused a significant and dose dependent improvement in the concentration of male reproductive hormones: resulting in a predictable increase in sperm indices.

Enhancing endometrial receptivity in FET cycles: exploring the influence of endometrial and subendometrial blood flow along with endometrial volume.

Fetal health and a receptive and healthy endometrium are two essential factors in achieving successful implantation. If the endometrium is unreceptive, postponing the transfer cycle to a suitable time can enhance the chances of pregnancy. This study aims to assess the impact of endometrial and sub-endometrial blood flows measured by Doppler ultrasound, as well as endometrial volume, on endometrial receptivity in frozen embryo transfer (FET) cycles. 112 patients with a mean age of 33.93 ± 4.93 years underwent in vitro fertilization (IVF). Serum β-hCG level was used to confirm pregnancy, and among the participants, 50 (44.6%) achieved pregnancy after IVF. The study results revealed a significant difference in endometrial blood flow between the pregnant and non-pregnant groups, with a higher pregnancy rate observed in participants exhibiting multi-focal and spare endometrial blood flows (p < 0.05). Furthermore, there was a notable association between endometrial blood flow and pregnancy outcome, as indicated by higher ongoing pregnancy rates in those with multi-focal and spare endometrial blood flows (p < 0.05). However, no significant differences were observed in endometrial variables such as volume, length, width, thickness, and pattern between the pregnant and non-pregnant groups. Additionally, contextual parameters showed no significant relationship with pregnancy outcome (p > 0.05). The study also found that endometrial measurement indices did not have a significant impact on pregnancy outcomes, with no significant differences observed between the groups (p > 0.05). In conclusion, endometrial blood flow is crucial for a successful pregnancy after IVF, while the predictive value of the endometrial volume is limited for pregnancy outcomes.

[Clinical efficacy of induction chemoimmunotherapy for locally advanced hypopharyngeal carcinoma: a prospective phase Ⅱ study].

Objective: To evaluate the objective response rate (ORR) of induction chemoimmunotherapy with camrelizumab plus TPF (docetaxel, cisplatin, and capecitabine) for locally advanced hypopharyngeal squamous cell carcinoma (LA HSCC) and potential predictive factors for ORR. Methods: A single-center, prospective, phase 2 and single-arm trial was conducted for evaluating antitumor activity of camrelizumab+TPF(docetaxel+cisplatin+capecitabine) for LA HSCC between May 21, 2021 and April 15, 2023, patients admitted to the Eye & ENT Hospital affiliated with Fudan University. The primary endpoint was ORR, and enrolled patients with LA HSCC at T3-4N0-3M0 received induction chemoimmunotherapy for three cycles: camrelizumab 200 mg day 1, docetaxel 75 mg/m2 day 1, cisplatin 25 mg/m2 days 1-3, and capecitabine 800 mg/m2 days 1-14. Patients were assigned to radioimmunotherapy when they had complete response or partial response (PR)>70% (Group A), or assigned to surgery plus adjuvant radiotherapy/chemoradiotherapy when they had PR≤70% (Group B), and the responses were defined by using tumor volume evaluation system. Tumor diameter was also used to assess the treatment responses by Response Evaluation Criteria in Solid Tumors (RECIST) version 1.1. Use SPSS 23.0 software was used to analyze the data. Results: A total of 51 patients were enrolled who underwent the induced chemoimmunotherapy for three cycles, and all were males, aged 35-69 years old. After three cycles of induction immunochemotherapy, 42 (82.4%) patients existed in Group A (complete response or PR>70%) and 9 patients (17.6%) in Group B (PR≤70%), the ORR was 82.4%. The primary endpoint achieved expected main research objectives. Compared to the patients of Group A, the patients of Group B showed the higher T stage and the larger volume of primary tumor before induced immunochemotherapy, and also had the less regression of tumor volume after induced immunochemotherapy (all P<0.05). The optimal cutoff value of pre-treatment tumor volume for predicting ORR was 39 cm3. The T stage (OR=12.71, 95%CI: 1.4-112.5, P=0.022) and the volume (OR=7.1, 95%CI: 1.4-36.8, P=0.018) of primary tumor were the two main factors affecting ORR rate of induction chemoimmunotherapy. Conclusion: The induction chemoimmunotherapy with camrelizumab plus TPF shows an encouraging antitumor efficacy in LA HSCC.